Search Results for: battery charger

Automatic battery float charger circuit

Engineeering Projects
automatic float charging circuit

Automatic battery float charger circuit: This article aims to develop a battery charger circuit using the principle float charging technique. Afloat charger is also referred to as a smart charger, maintenance charger, or storage charger because it charges the battery at the same rate at which it self-discharges. The main reason for using a float charger is, that it protects the battery from overcharging and deep discharging. Thus, you can connect the float charger circuit to a battery for indefinite intervals of time i.e. there is no need to disconnect…

DIY Solar 18650 Charger with Emergency Light

Engineeering Projects
DIY Solar 18650 Charger with Emergency Light

In this article, you will learn to design DIY Solar 18650 Charger as well as a solar emergency light. This device will help you charge a device through a USB port and it has an inbuilt led in it, which will serve as an emergency light when needed. Introduction of DIY Solar 18650 Charger with Emergency Light: Solar energy is the best way to reduce your energy consumption as it uses sunlight to produce energy. Sunlight can be utilized neatly, without harming our environment. So, here we are also going…

Battery Level Indicator

Engineeering Projects
battery level indicator circuit

The circuit ‘Battery Level Indicator’ is simple, cheap, and compact. It can be used in emergency lights and other power supply circuits. We are using this simple circuit ‘battery level indicator’ for over a year and has found it works well in emergency light as well as battery charger circuit. We already indicate various battery voltage states using IC, this time we come with a little different concept and circuit for battery indication. Other battery level circuits posted in bestengineeringprojects.com Battery Status indicator Circuit 10 Level Battery Charge Indicator Circuit…

10 Level Battery Charge Indicator Circuit

Engineeering Projects
10 level battery charge indicator

We already indicates state of battery using battery status indicator circuit and battery voltage state indicator using 741 IC, this time we indicate battery status in 10 different levels. The project “10 Level Battery Charge Indicator Circuit” is designed using comparator IC LM3914, used to indicates charge of battery in 10 different level. The project uses 10 LEDs to indicate the charge of battery in 10 level i.e. each glowing LED indicates 10% of charge in battery. Let say, if seven LEDs glow, the charge available in battery is 70%. It…

3000W Inverter with Inbuilt Charger using AT89C2051

Engineeering Projects
3000W inverter's microcontroler section

The project posted here is a 3000W inverter with the facility like an inbuilt charger, over and under voltage control, temperature control, microcontroller-based, etc. We all know that an inverter is a device that changes DC power into AC power (just opposite of a rectifier). The general-purpose inverter (low or medium power inverter) used in our house converts 12V DC voltage to 220V AC. But the circuit posted here converts 24V DC (two 12V batteries connected in series) to 220V AC. Circuit Description of Microcontroller Based 3000W Inverter with inbuilt…

Car (Automobile) Battery Maintaining Circuit

Engineeering Projects
car battery maintaining circuit

Here is a simple circuit built around very common electronics components easily available in the local market which is used to protect car (automobile) batteries from deep discharge and also protect from getting damaged. Let’s get some facts about automobile batteries. We all know that battery itself has some self-discharge rate which depends upon battery capacity and the materials used to make it. Various reasons discharge a battery like an electrical installation in a car. When we do not use our automobile for a longer period the battery becomes fully…

Simple Battery Changeover Relay

Engineeering Projects
circuit diagram of battery changeover relay

It is economical to use a battery eliminator but with frequent power failure in most developing countries, it becomes annoying to change over from battery eliminator to battery operation every time the electric supply fails. Thus, we had designed a simple battery changeover relay. A simple way to avoid the nuisance is by connecting the battery and power pack in parallel. But the advantage with such a system is that when the eliminator voltage falls, even slightly (say from 6V to 5V), though the performance of the set remains unaffected,…

Microcontroller Based Solar Charger

Engineeering Projects
circuit diagram of microcontroller based solar charger

The project ‘Microcontroller Based Solar Charger’ has been so popular, that everyone knows about it. Here we will discuss the construction details and areas where this project is applicable. With excessive non-renewable energy consumption, we humans are facing plentiful difficulties. Renewable sources of energy are considered our only hope to rise from this situation. Solar energy is one of them which have spread all over for its easy availability, effective cost, and reliability. The project, ‘Microcontroller Based Solar Charger’ is the finest example to demonstrate the easy utilization of resources…

Battery Saver Circuit

Engineeering Projects
battery saver circuit

“Dry cell is not rechargeable”, this is what people think. This concept can be proven wrong by this particular project ‘Dry cell charger‘. Now here is another electronics trick to make the concept of ‘Battery Saver’ come true. The project battery sever not only charges dry cell but also enhances battery life by saving energy. The project ‘Battery saver circuit’ is considered very useful project for those, who run their appliance solely based on dry cell. Circuit Description Batter Saver Circuit:- The circuit is so simple that anyone can understand,…

Dry Cell Charger | Easy Electronic Projects

Engineeering Projects
circuit diagram of dry charger

We all are fed with the fact that dry cell is not rechargeable and it has no use once it is discharged during use. And, people simply throw it away and buy a new one. Because of this, people are forced to invest quite a lot on battery. In order to overcome this problem, here we have presented a new project ‘Dry Cell Charger’, which has been tested and verified practically. Using the circuit dry cell charger one can charge dry cell 6 to 8 times which evidently contributes to…

  1. Pages:
  3. 1
  4. 2
  5. 3
  6. 4