Simply, by name of the project ‘Christmas Decoration Circuit With Music’ it can be easily understand that this project is concerned about decoration. Different kinds of item are available nowadays in the market for decoration. Where you can buy/pick one of the item from market or you can make it one. The interest lies on the things you have created with yours owns. Definitely, this project is your interest and can be used in Christmas decoration.
Circuit Description of Christmas Decoration Circuit With Music : –
The circuit of Christmas decoration are divided into two main sections i.e. lighting and sound section. Lighting section consist of five set of LEDs which operates on binary sequence and it repeats itself at the interval of few minutes. Here, LEDs can be of any color according to our interest. This decoration piece decorates your Christmas tree as well as your home too.
Beside of these five set of LEDs you can add an extra four set of LEDs which can be mode turned on one at a time or one after another.
Sound Section | Christmas Decoration Circuit With Music
This section of this project consist of special musical IC which generate music specially used for musical greeting card. This circuit can be your next project too. ‘Jingle bell’, ‘Santa clause is coming to town’, ‘wish you merry Christmas’ and many more kinds of music can be heard at some interval of time.
The lighting section of Christmas decoration circuit consist a timer IC (IC1), binary counter IC (IC2), and shift resistor IC (IC3). Timer IC is used in astable multivibrator mode which works on the frequency of 1Hz. The output of timer IC (pin 3) is given to the input pin of IC2 and IC3. The eight LEDs are connected at the output (four in each IC) of these IC (IC1 and IC2) as shown in figure. These eight LEDs glow one by one and which looks like sequence.
Check out other various Game circuit projects posted in bestengineeringprojects.com
- Pachisi Circuit Game using 555 IC
- Electronics Cricket Project | Game Circuit
- LED Dice Using Arduino
- Hypnotizer Using Arduino
- Electronic Game Circuit | Electronic Pendulum
PARTS LIST OF CHRISTMAS DECORATION CIRCUIT WITH MUSIC
| Resistors (all ¼-watt, ± 5% Carbon) |
| R1, R7 = 1 KΩ
R2 = 10 KΩ R3 = 1.5 KΩ R4 = 180 Ω R5 = 330 Ω R6 = 470 Ω R8 = 390 Ω |
| Capacitors |
| C1 – C3 = 10 µF, 16V (Electrolytic Capacitor) |
| Semiconductors |
| IC1 = NE555 (Timer IC)
IC2 = CD4040B (12-stage Binary Counter IC) IC3 = 47HC164 (8-bit Shift Register IC) IC4 = UM66 (Melody Generator IC) T1, Â T2 = 2N3904 (Small Signal NPN Transistor) |
| Miscellaneous |
| LED1 – LED9 = Any color LEDs
LS1 = 8Ω Loudspeaker |
hey what are the transistor specifications
Thank you for concern. The value of transistor T1 and T2 has been uploaded.