Fuzz effect box for Guitarists

The ‘fuzz’ sound is derived by clipping the input waveform, thereby enriching the signal with odd harmonic which provide the hash sound. This circuit “Fuzz Effect Box for Guitarists” is a basic project produces a fuzz which gradually decays into a ‘clean signal’.

Circuit Description of Fuzz Effect Box for Guitarists

The circuit uses the standard op-amp 741 in non-inverting configuration. The gain of this amplifier is controlled by the feedback network comprising VR1, R2 and R3.

circuit diagrm of fuzz effect box for guitarist

Input signal from the guitar passes to the op-amp through DC blocking capacitors C1. Resistor R1 sets the input impedance at 100 K, which suits most guitars. Resulting signals from the op-amp are reduced in amplitude by the potential divider action of R6 and R7 giving an attenuation factor of approximately four. Thus the maximum output signal via capacitor C3 available for inputting to an amplifier is about 150mV. This level is maintained during the period of clipping (fuzz) and then decays naturally to zero.

A foot switch may be used to bypass the signal whenever required. The whole circuit can be assembled on a general-purpose PCB. A red LED can be used to indicate that the “Fuzz Effect” is ‘ON’ by coupling it to the bypass switch suitably.

This unit Fuzz effect box for Guitarists is power by 8V PP3 battery.

Other Guitar Related Electronic Project posted in bestengineeringprojects.com

  1. Electric guitar preamp circuit
  2. Tone Control for Guitar Amplifier Using 741
  3. Guitar Amplifier | Convert Hawain Guitar to an Electric Guitar

PARTS LIST OF FUZZ EFFECT BOX FOR GUITARISTS

Resistor (all ¼-watt, ± 5% Carbon)

R1 = 100 KΩ

R2 = 1.2 KΩ

R3 – R5 = 10 KΩ

R6 = 3.3 KΩ

R7 = 1.8 KΩ

VR1 = 100 KΩ LIN.

Capacitors

C1, C3 = 0.1 µF (Ceramic Disc)

C2 = 10 µF, 16V (Electrolytic Capacitor)

Semiconductors

IC1 = LM741 (General Purpose Operational Amplifier IC)

D1, D2 = 1N4148 (silicon switching signal diode)

LED1 = RED LED

Miscellaneous

Switch

One Thought to “Fuzz effect box for Guitarists”

  1. RH

    o/p via R6 to C2???

Leave a Comment