Fuse tube light is useless what we generally think. This concept can be proven wrong by this particular project. This electronic trick let you use your fuse tube light at night lamp. The circuit comprises a bridge rectifier and a starter where, starter is used to boost up the voltage and is connected to the fuse side of tube light as shown in figure. The mains voltage is direct rectified using bridge rectifier made for four general purpose diode. The output with starter is connected to tube light as shown in circuit diagram.
BEP Note: Do not use new or working tube light because the output of this circuit is adjusted as per required for fuse tube of for new one.
PARTS LIST
Resistor |
600 Ω/40W |
Semiconductors |
D1 – D4 = 1N4007 |
Miscellaneous |
40 W Fuse tube light
Starter |
Working.