Category: Digital Electronics Projects

Mans are born of habit, and we all want comfortable. At night while sleeping we often switch of the light. But sometime we used to increase or decrease the speed of fan. And it is very difficult to trace the switch board in a dark room at night and to wake-up from bed is also irrigative. By keeping this problem in mind the group of electronics geek at Dreamlover technology designed and verified a electronics project called light controlled digital fan regulator circuit. You can also check this awesome project IR…

Read More

What are Frequency Generator and Divider Circuit? A frequency generator is a circuit that generates a frequency and a divider circuit divides the generated frequency with various factors to get different frequency values. Various assembled frequency generators and divider circuits are available in the market but they are quite expensive to buy. The group of electronics geeks at dream lover technology designs a low-cost square wave signal generator and divider circuit. The frequency of 1 Hz, 10 Hz, 100 Hz, 1 kHz, 100 kHz, and 1 MHz are obtained at…

Read More

While returning home on a cold winter night it can be really frustrating if one is unable to unlock the gate due to insufficient light. A simple, economic yet reliable solution to the problem is provided by the project “Automatic Gate Light Circuit”. When it is quite dark, a slightly pressure on the bell switches the gate lights on for a preset interval of time. The project automatic gate light circuit is also a valuable addition to domestic security arrangements as it deters unwelcome caller. Description of Automatic Gate Light…

Read More

The circuit 1/86400 Hz frequency generator provides one clock pulse every 24 hours from a 1 Hz input clock pulse source, which is commonly available through a digital clock. It can be used to provide am/pm indication in those digital clocks which do not have this facility, or it may be utilized to advance the date of an electronic calendar every day. It can also be used to trigger an alarm at a determined time without fail. Circuit Description of 1/86400 Hz Frequency Generator The present circuit 1/86400 Hz frequency…

Read More

Wireless control of devices using infrared is not new to electronics hobbyists. Now, here is wireless control of the device using ultrasonic sound waves tested in BEP Lab. The project ultrasonic Lamp brightness controller circuit uses ultrasonic sound waves (above 20 kHz) for remote control of lamp brightness. Circuit Description of Ultrasonic Lamp Brightness Controller Circuit As with all wireless control systems, the Ultrasonic lamp-brightness controller comprises a transmitter and receiver circuit. Transmitter Circuit | Ultrasonic Lamp Brightness Controller Circuit The transmitter circuit generates an ultrasonic sound wave of about 40-50…

Read More

The circuit described here is a hex to binary converter circuit using four, 8-input NAND gate 7430 ICs. The input keyboard switches SW1 to SW15 are connected in such a manner that the pressing of any switch produces the binary ABCD outputs of the corresponding decoded numbers. When all inputs in a NAND gate are high, it produces a low output, But when any of its input goes low, its output becomes high. Normally, all switches are open, the binary output is 0000. Pressing a switch gives a ‘low input’…

Read More

ICs 555 and 4017 are well-known to electronics hobbyists. Presented here is a very interesting project of an LED stopwatch Circuit using timer 555 and decade counter 4017 ICs. This stopwatch is able to monitor time from one second to 60 minutes. It can be used in sports, laboratories, etc. IC 555 (IC1) is the heart of the circuit. It is used in astable multivibrator mode. The special feature of this mode is that if this pin 4 of IC1  is kept at a high logic, it produces a clock…

Read More